Energy Analysis, Building Energy Index and Energy Management Strategies for Fast-Food Restaurants in Malaysia

Commercial buildings in Malaysia contribute to 35% of the total electricity demand. During the recent COVID-19 pandemic, the global economy faced a challenging situation that forced many businesses to shut down. However, fast-food restaurants with drive-through features managed to get through this pandemic phase without much effect from the economic impact. Since COVID-19, the operational guidelines have changed for restaurants. However, from an energy perspective, fast–food restaurants are high energy consumers in the retail sector. This paper analyses the load profile of fast-food restaurants and the potential strategies that can be adopted in a free-standing fast-food restaurant. From analysis, it is calculated that a total of RM 97,365.9 of utility savings can be obtained in a year. A total of 91,392.1 kg CO2, 881.8 kg SO2 and 385.5 kg CO pollutant emissions can be reduced. The BEI for the restaurant was reduced to 856.4 kWh/m2/year. By converting to energy-saving strategies, the return on investment was 27.3% and 3.7 years, which is a very short period of time and is attractive for businesses of this nature.

Effect of meteorological factors on COVID-19 cases in Bangladesh.

This work is intended to examine the effects of Bangladesh's subtropical climate on coronavirus diseases 2019 (COVID-19) transmission. Secondary data for daily meteorological variables and COVID-19 cases from March 8 to May 31, 2020, were collected from the Bangladesh Meteorological Department (BMD) and Institute of Epidemiology, Disease Control and Research (IEDCR). Distributed lag nonlinear models, Pearson's correlation coefficient and wavelet transform coherence were employed to appraise the relationship between meteorological factors and COVID-19 cases. Significant coherence between meteorological variables and COVID-19 at various time-frequency bands has been identified in this work. The results showed that the minimum (MinT) and mean temperature, wind speed (WS), relative humidity (RH) and absolute humidity (AH) had a significant positive correlation while contact transmission had no direct association with the number of COVID-19 confirmed cases. When the MinT was 18 °C, the relative risk (RR) was the highest as 1.04 (95%CI 1.01-1.06) at lag day 11. For the WS, the highest RR was 1.03 (95% CI 1.00-1.07) at lag day 0, when the WS was 21 km/h. When RH was 46%, the highest RR was 1.00 (95% CI 0.98-1.01) at lag day 14. When AH was 23 g/m3, the highest RR was 1.05 (95% CI 1.01-1.09) at lag day 14. We found a profound effect of meteorological factors on SARS-CoV-2 transmission. These results will assist policymakers to know the behavioral pattern of the SARS-CoV-2 virus against meteorological indicators and thus assist to devise an effective policy to fight against COVID-19 in Bangladesh.

Are meteorological factors enhancing COVID-19 transmission in Bangladesh? Novel findings from a compound Poisson generalized linear modeling approach.

Novel coronavirus (SARS-CoV-2) causing COVID-19 disease has arisen to be a pandemic. Since there is a close association between other viral infection cases by epidemics and environmental factors, this study intends to unveil meteorological effects on the outbreak of COVID-19 across eight divisions of Bangladesh from March to April 2020. A compound Poisson generalized linear modeling (CPGLM), along with a Monte-Carlo method and random forest (RF) model, was employed to explore how meteorological factors affecting the COVID-19 transmission in Bangladesh. Results showed that subtropical climate (mean temperature about 26.6 °C, mean relative humidity (MRH) 64%, and rainfall approximately 3 mm) enhanced COVD-19 onset. The CPGLM model revealed that every 1 mm increase in rainfall elevated by 30.99% (95% CI 77.18%, - 15.20%) COVID-19 cases, while an increase of 1 °C of diurnal temperature (TDN) declined the confirmed cases by - 14.2% (95% CI 9.73%, - 38.13%) on the lag 1 and lag 2, respectively. In addition, NRH and MRH had the highest increase (17.98% (95% CI 22.5%, 13.42%) and 19.92% (95% CI: 25.71%, 14.13%)) of COVID-19 cased in lag 4. The results of the RF model indicated that TDN and AH (absolute humidity) influence the COVID-19 cases most. In the Dhaka division, MRH is the most vital meteorological factor that affects COVID-19 deaths. This study indicates the humidity and rainfall are crucial factors affecting the COVID-19 case, which is contrary to many previous studies in other countries. These outcomes can have policy formulation for the suppression of the COVID-19 outbreak in Bangladesh.

How air quality and COVID-19 transmission change under different lockdown scenarios? A case from Dhaka city, Bangladesh.

The transmission of novel coronavirus (COVID-19) can be reduced by implementing a lockdown policy, which has also been proven as an effective control measure for air pollution in the urban cities. In this study, we applied ground- and satellite-based data of five criteria air pollutants (PM2.5, NO2, SO2, O3, and CO) and meteorological factors from March 8 to May 15, 2020 (before, partial-, and full-lockdown). The generalized additive models (GAMs), wavelet coherence, and random forest (RF) model were employed to explore the relationship between air quality indicators and COVID-19 transmission in Dhaka city. Results show that overall, 26, 20.4, 17.5, 9.7 and 8.8% declined in PM 2.5, NO2, SO2, O3, and CO concentrations, respectively, in Dhaka City during the partial and full lockdown compared to the period before the lockdown. The implementation of lockdown policy for containing COVID-19 transmission played a crucial role in reducing air pollution. The findings of wavelet coherence and partial wavelet coherence demonstrate no standalone coherence, but interestingly, multiple wavelet coherence indicated a strong short-term coherence among air pollutants and meteorological factors with the COVID-19 outbreak. Outcomes of GAMs indicated that an increase of 1-unit in long-term exposure to O3 and CO (lag1) was associated with a 2.9% (95% CI: -0.3%, -5.6%), and 53.9% (95% CI: 0.2%, -107.9%) decreased risk of COVID-19 infection rate during the full-lockdown period. Whereas, COVID-19 infection and MT (mean temperature) are modulated by a peak during full-lockdown, which is mostly attributed to contact transmission in Dhaka city. RF model revealed among the parameters being studied, MT, RH (relative humidity), and O3 were the dominant factors that could be associated with COVID-19 cases during the study period. The outcomes reported here could elucidate the effectiveness of lockdown scenarios for COVID-19 containment and air pollution control in Dhaka city.

Complete Genome Sequence of a Novel Coronavirus (SARS-CoV-2) Isolate from Bangladesh.

The complete genome sequence of a novel coronavirus (severe acute respiratory syndrome coronavirus 2 [SARS-CoV-2]) isolate obtained from a nasopharyngeal swab from a patient with COVID-19 in Bangladesh is reported.